User Manual
According to the operating load, select the suitable cylinder bore size.
Before screwing the correct fitting in, make sure the thread ports and fitting are clean. Be aware of dust or fitting tap falling into the cylinder.
It is suggested to use the medium lubricated by 40μ Filter element.
Under the high-temperature environment, use the high-temperature type cylinder. Under the low-temperature environment, take measure to avoid frozen.
In order to prevent damaging the cylinder, test the cylinder.
In order for the cylinder to achieve long service life, do not side-load cylinder.

If the fitting were removed from the cylinder for a period of time, be sure to block the thread port with protecting cap to keep the dust away.

Specifications:

Bore(mm)
32
40
50
63
80
100
125
160
200

Operation
Double acting

Fluid
Air

*Mounting
Basic FA FB CA CB LB TC TC-M

Operating pressure
1.0~9.0kgf/cm2 (0.1~0.9MPa)

Proof pressure
13.5kgf/cm2 (1.35MPa)

Operating temperature
0~70

Operating piston speed
50~800 mm/s

Cushioning
Adjustable cushioning

Cushioning stroke
20
26
45

Port size
G1/8
G1/4
G3/8
G1/2
G3/4

* SCD, SCJ mounting: FA, FB, LB, TC & TC-M

Mounting:
LB: Front and back fixed
FA: Front cover fixation (Front flange)
FB: Back cover fixation (Rear flange)
CA: Back cover fixation (Single Clevis)
CB: Back cover fixation (Double Clevis)
TC: Centre Turnnion
TC-M: Swinging type attaching foot seat.