High pressure pump

Double impeller industry water pumpThe SCM2 series are with two back to back impellers, it is use for high head values but if hard to reach with single impeller centrifugal pump. Suitable for civil and industrial uses to pump clean water and chemically non-aggressive liquid. Particularly be used for increasing the supply pressure, feeding boilers and loading extremely. These pumps should be installed in a covered area, protected against the weather.
Pump body: Cast iron
Impeller: Brass
Motor: Closed, externally ventilated
Insulation class: B (Class F if required)
Protecton class: IP44 / IP54
Duty: Continuously rated
Mechanical seal: Φ 16, Φ 18, Φ 25 ceramic steatite/metalized carbon
TYPE Power Ampere R. P. M Q. Max
(l/min) H. Max
(m) S. Head
(m) Pipe Dia
(mm) L× W× H
(mm) N. W
(kg)
HP kW 1~220V 3~380V
SCM2-32 0.75 0.55 3.6 - 2850 90 30 9 1"× 1" 380× 210× 240 16.2
SCM2-40 1 0.75 5 1.8 100 35 18.8
SCM2-52T 1.5 1.1 7.5 2.7 130 48 11/4"× 1" 415× 255× 320 23.5
SCM2-60T 2 1.5 9.6 3.5 140 52 24.5
SCM2-68T 3 2.2 13.5 5 200 60 11/2"× 11/2" 480× 290× 350 31.0
SCM2-70T 4 3 - 7.2 240 70 39.0
SCM2-80T 5.5 4 - 9.3 260 84 42.5
SCM2-90T 7.5 5.5 - 14.1 280 90 2"× 11/4" 62.0
SCM2-100T 10 7.5 - 15.0 300 105 570× 290× 360 62.0
SCM2-80AT 10 7.5 - 15.0 360 80 68.0
SCM2-90AT 12.5 9 - 18.0 380 95 82.0
SCM2-100AT 15 11 - 21.8 420 110 85.0
SCM2-110T 17.5 13 - 26.3 440 120 2"× 11/2" 600× 320× 400 110.0
SCM2-120T 20 15 - 30.5 460 130 120.0