Range of Performance
Flow rate up to 100L/min (6m3/h)
Head up to 100 m
Working Condition
Suction lift up to 50 m
Liquid temperature up to +40C
Ambient temperature up to +40 C
Max. Working pressure: 10 bar
Application and Installation
Being equipped with a unique set of ejector, AUTOJET self-priming pump is designed for delivering water from depth of up to 100m. They are recommended for domestic use as well as water distribution (as part of a pressure set), garden irrigation etc. The pump should be installed in enclosed places, or at least protected against inclement weather.

Structure Feature
Pump body: Cast iron
Motor Bracket: Aluminum
Impeller: Brass
Motor shaft: SS420 or CS45#
Mechanical seal: Ceramic - Graphite
Electric motor: Single-phase 220V - 50Hz with capacitor and thermal overload protector. Voltage
Fluctuation for 10% more or less is allowed and other voltage for 60Hz is also available.
Insulation: Class B
Protection: IP 44

The normal power standard is 220V 50Hz single phase.
Three phase 220/380V/50Hz, 220/440V/60Hz, Single phase 230V, 240V, 127V, 110V, 115V/60Hz models are available on request.