English Name: LITHIUM ALUMINUM ALLOY POWDER
Use: Anode of Primary Lithium Battery
Chemical Composition: 20± 1% Lithium, Remainder aluminum
Appearance: Silvery-white Powder
Specification: 40 mesh -60mesh -80mesh
-100mesh -200mesh
Package: Sealed in grinding bottle with Argon gas and then put into iron can which is filled with foam and shipped in wooden box.
Package Specification: 125mL grinding bottle 250mL grinding bottle

Product Property
1. Lithium aluminum alloy powder can react with atmospheric moisture, oxygen, nitrogen and carbon dioxide of the air. It can self-ignite in humid air. The main production after burning in the air is Lithia and alumina. Lithia can form lithium hydroxide after absorbing water.
2. React violently with water and form hydrogen which can burn and explode under some certain conditions and lithium hydroxide.
3. React violently when contacting acid and halogen.
4. The product burns easily and explodes when comes into contact with ignition source or impact during the course of shipping and using.

Using Method
1. Check if the package is intact, the label is clear and the packing list, product certificate and manual are complete before using.
2. Check if the usage date is within product validity date.
3. Check if the product has absorbed moisture or oxidation has occurred. If the package or product has expanded, split, become hot, become black and lumpy, the product can't be used any more and need to be discarded as waste.
4. The product should be opened in the glove box with an argon atmosphere or in a drying room where the relative humidity is lower than 3%.
5. Safety precautions should be taken before opening the product and workers should wear safe work clothes, respirator, hat, glasses and gloves.
6. Taking out the product from iron can and opening glass bottle should be performed on the operating table in case explosion occurs if dropped accidentally.
7. Cut the adhesive tape around the bottle before opening it and then push off the lid of the bottle carefully. Any strong unscrewing of the lid is forbidden in case the friction causes burning and explosion.
8. Try to use all the product after opening the package. Product that can't be used up should be put into a bottle which is sealed with paraffin and kept carefully until discarded as waste.
9. only open one bottle of product at a time to avoid danger.
10. The operator who has water or sweat on the hands, body, or skin or has any wounds is not allowed to contact lithium aluminum powder.
11. The operators should keep a certain distance from each other to reduce any injury that may occur when there is an accident.

Description of Product Dangers
1. The danger mainly comes from the high temperature of self-burning, stimulating fog and the harm of explosion of hydrogen which is produced when product meets water.
2. Lithium hydroxide is produced when the product meets moisture on the skin, sweat, blood and the moisture around eyes and respiratory path. This will cause pain and harm to the body.