Range of Performance
Flow rate up to 45L/min (2.7m3/h)
Head up to 60 m

Working Condition
Submersion depth: 8m
Liquid temperature up to +40oC
Ambient temperature up to +40 oC
Max. Working pressure: 6 bar

Application and Installation
They are recommended for pumping clean water without abrasive particles and liquids that are chemically non-aggressive to the materials of which the pump is made.
They are suitable for domestic use and in particular for delivering water in combination with small pressure sets, as well as for irrigation.
The pumps shall be installed in enclosed places, or at least protected against inclement weather.

Structure Feature
Pump body: Cast iron
Motor Bracket: Aluminum
Impeller: Brass
Motor shaft: SS420 or CS45#
Mechanical seal: Ceramic - Graphite
Electric motor: Single-phase 220V - 50Hz with capacitor and thermal overload protector. Voltage
Fluctuation for 10% more or less is allowed and other voltage for 60Hz is also available.
Insulation: Class B
Protection: IP 44