Main application of this kind of sand pump

   Pumping tailing slurry for industrial and mining organizations, clearing silt in sedimentation basin, pumping silty sand or fine sand for seashore or port, pumping powdery iron ore for foreign countries, etc. The overflowing parts adopt wear-resistant alloy material and have long service life. In suitable construction environment, the mating is simple and convenient in operation and application. If the sand is large, high pressure gun can be added to increase the medium concentration.

Service conditions

1. Power supply: The power source is 50Hz/380V three-phase alternating-current supply, and the capacity of the substation transformator is two to three times of the rated capacity of the motor.

2. Temperature of the medium: The temperature of the medium cannot exceed 60Celsius, and the medium does not contain inflammable or explosive gases.

3. Max weight density of the solid particle: The maximum weight concentration of the solid particles in the medium: the maximum weight concentration of the ash is 45% and the maximum weight concentration of the slag is 60%.

4. Submerged depth:  not more than 20 meters, and not less than 1 meter.

5.The unit works in the medium vertically, and the working status is continuous.

Our slurry pump is for the most difficult mill duties. A wide variety of impellers and shaft seals prove a perfect fit for all kinds of applications. It provide excellent wear life while maintaining efficiency. We can guarantee our products and will offer back-up support and assistance with installation, operation, maintenance and repairing as necessary.

We can customize special dredging and mining equipments according to different environment and customer requirement which can accomplish the whole set of working procedures of filtering , extracting , separating, washing , classifying and put our qualified products directly. Our experienced engineers will work closely with you to customize a best dredging solution for your particular needs.

Structure:

Bearing assembly—Switzerland or Japan imported

Liners—Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers.

Casing—Ductile iron with external reinforcing ribs provide high operation pressure capabilities and an extra measure of safety.

Impeller—Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Cast in impeller threads require no inserts or nuts.

One-piece frame—A very robust one-piece frame cradles the type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.

Features

1.The wetted parts of the pump are made of high chromium wearable alloy, so the pump has good wear resistance and large flowing passage.

2. It is mainly used for transfering the silt, ore pulp, coal liquid, sandstone containing big solid particles.

3. It is widely used in the dredge of silt, ore pulp, coal liquid, river, port and so on.

Working conditions

1.Power supply : 50 Hz/380V ,Three-phase AC   (Power source can be ordered to design to match different frequency&voltage of different country/location or under your requirement)

2.Temperature of the medium: less than 60 degree Celsius, without inflammable or explosive gas.

3.Max weight density of the solid particle: clinker less than 45%, scoria less than 60%

 4.Submerged depth: less than 20 meters

5. Ambient air without the risk of explosion,no gas corroding the mental and damaging the insulation and no conductive dust

6.With the vertical plane inclination ≤ 5°

7. Installation mode: indoor vertical installation,

8. Don't install in place with vibration or shock

Application:

1.Absorb the sand in the river, lake and sea.

2.Absorb the silt and sand in the river, lake, sea, reservoir , pound , electric power plant .

3.Absorb the slurry of stone processing plant.

4.Absorb the slurry in the deep well.

We will always try to assist our customers with selecting the right equipment for their project. One of the most important consideration for all potential dredging project is the site geotechnical conditions. This is key factor on selection and we will assist to study the data and resources, it is an important condition for us.

Reliable quality of slurry pump,Reliable Company!

Do not hesitate to contact us if have any question.