Model:LYK
DEscriptIONS:
Gouging Carbon include jointed Gouging Carbon, pointed Gouging Carbon, flate Gouging Carbonetc and are used for cutting and boring, removing of defects in welds and casts, grooving on the back of weld and flushing the excess metal of the weld.
APPLICATIONS:
1. Machining U grooves for weld joint preparation
2. Removing defective welds
3. Cleaning and repairing metal castings
4. Removing hard surface metal to facilitate repair
5. Cutting non ferrous and other hard to cut metals
6. Rough machining.
INSTRUCTIONS:
1. The electrodes must keep in dry environment, if it is affected with damp must be drying before use.
2. When using for the direct current, the electrodes link to the anode, and task to the cathode.
3. Keeping steady of working air pressure0.5-0.6Mpa.
4. The arc between electrodes and task is 3mm, the electrodes come out clamp about 100mm.
5. The electrodes and tast must have a angle and dig throw the tangent.
6. Keep aeration during use, operate accord with the work limit.
OUR PRODUCTS:
1. Jointed Gouging Carbon
Jointed carbon gouging rods are machined with male and female ends allowing continuous operation with no wasteage of stub ends. These items can be used in manual and automatic applications with high metal removal rates.
2. Flat Gouging Carbon
Flat carbon rods work best in confined spaces or detailed components for precise metal removal from castings. These items are best used in close tolerance metal removal applications producing a clean finish.
3. Pointed Gouging Carbon
Pointed carbon gouging rods are energy efficient and cost competitive, some operators prefer these rods due to the positive holding of a gouging rod in the electrode holder leading to less splatter in manual applications.
Properties for Pointed Gouging Carbon:
| Model | Diameter x Length | Current Ranger(A) | Applications | |
| (mm) | (inches) | |||
| B503.2 | 3.2x305 | 1/8x12' | 130-180 | |
| B504 | 4x305(355) | 5/32x12'(14') | 150-200 | |
| B505 | 5x305(355) | 3/16x12'(14') | 200-250 | |
| B506 | 6x305(355) | 15/64x12'(14') | 300-350 | |
| B506.5 | 6.5x305(355) | 1/4x12'(14') | 320-370 | |
| B507 | 7x355 | 9/32x14' | 350-400 | |
| B508 | 8x305(355)(510) | 5/16x12'(14')(20') | 400-450 | |
| B509 | 9x305(355) | 23/64x12'(14') | 450-500 | |
| B510 | 10x305(355)(510) | 3/8x12'(14')(20') | 500-550 | |
| B511 | 11x305(355)(510) | 7/16x12'(14')(20') | 600-650 | |
| B512 | 12x305(355) | 15/32x12'(14') | 750-850 | |
| B513 | 13x305(355)(430)(510) | 1/2x12'(14')(17')(20') | 800-1000 | |
| B516 | 16x355(430)(510) | 5/8x14(17')(20') | 1000-1200 | |
| B519 | 19x355(430)(510) | 3/4x14(17')(20') | 1200-1400 | |
More info,pls scan our website: http://www.liyikun.com
