Assembly parts of the product provided.
FEATURE
- Elastic body seat that contacts the plate is formed with body and ensures the perfect sealing even after the prolonged use.
- Simple design and heavy duty stainless steel screening is easy to maintain.
- Body and plate is light weight, and designed to prevent the additional loading when operating the pump.
- The internal epoxy coating on the in/out side of the valve is possible.
SPECIFICATION
DIAMETER | 50A(2'')- 800A(32'') |
APPLICABLE PRESSURE | 10K-20K 150LB-300LB |
CONNECTING ENDS | FLANGE TYPE |
TEST METHOD | According to KS B2304,API598 |
NUMBER OF SPRING | 1 1/2'' -5''(1EA),6''-22''(2EA) 24'' and over:(4EA) |
DEscriptION OF PARTS
NO | NAME | MATERIAL | Q'TY | |
10K | 150LB | |||
1 | BODY | FC200 | A216 Gr, WCB | 1 |
2 | PLATE | SCS 13,BC6 | CF8 | 2 |
3 | LOW SPRING | STS 316 WPA | 1-4 | |
4 | HINGE PIN | STS 304 | A276-304 | 1 |
5 | STOP PIN | STS 304 | A276-304 | 1 |
6 | PLUG | SM 25C | A576 1025 | 4 |
7 | BEARING | PTFE | 6-9 | |
8 | PIN STABILIZER | RUBBER | 4 | |
9 | SCREEN | STS 304 | 1 | |
10 | SCREEN PAD | STS 304 | 1 | |
11 | BOLT | STS 304 | 4-8 | |
12 | SEAT | NBR,EPDM | ||
DIMENSIONS(10K)
SIZE | Ø A | Ø C | Ø d | L | N-Øh |
50A | 155 | 120 | 60 | 160 | 4-19 |
65A | 175 | 140 | 73 | 175 | 4-19 |
80A | 185 | 150 | 89 | 190 | 8-19 |
100A | 210 | 175 | 114 | 190 | 8-19 |
125A | 250 | 210 | 141 | 215 | 8-23 |
150A | 280 | 240 | 168 | 245 | 8-23 |
200A | 330 | 290 | 219 | 300 | 12-23 |
250A | 400 | 355 | 274 | 355 | 12-25 |
300A | 445 | 400 | 324 | 400 | 16-25 |
350A | 490 | 445 | 356 | 530 | 16-25 |
400A | 560 | 510 | 406 | 550 | 16-27 |
Custom-tailored fabrication is available for the size over
450a(18'') and the class of ANSI 150LB
ADVANTAGE
- Face-to-face dimensions for Dual Plate Wafer Check Valves are about one fourth of a Swing Check Valve.
- Weight is as little as about 20%of the corresponding Swing Check Valve due to the compact design.
- Dual Plate Wafer Check Valves have a spring design to close valves more efficiently when the backfl occurs to reduce the water hammer.
- These valves have the lower pressure drop than Swing Check Valves because of little friction resistance.
- Dual Plate Wafer Check Valves are less expensive than Swing Check Valves because of the lightness and compact design.
- Because Dual Plate Wafer Check Valves are flangeless, they are installed between flanges.
- Normal installation method for horizontal flow is with the hinge pin in vertical position.
- Installation is available for both horizontal and vertical piping.
