Brand:Triangle
Send Inquiry
Advantage of wire-cut EDM:
- MIN thinnest wire of wire-cut EDM: 0.1mm
- MIN hole:0.15mm
- MIN slot: 0.2mm
- MIN angle of inclination of Wire: 15 degrees
- R&D Center was founded for professional jigs and fixtures for consumer electronics manufacture industry.
- near the SHANGHAI Port of China conveniently.
The equipment list is:
Equipment | From | Quantity | Accuracy |
Charmilles ROBOFIL 240cc and 440cc Wire-cutting | Switzerland | 5 | ±0.002mm |
EDM AgieCharmilles FW1P/FW1U | Beijing, China | 4 | ±0.01mm |
Grinder | Taiwan | 8 | ±0.002mm |
Miller | Taiwan | 8 | ±0.02mm |
Lather | China | 3 | ±0.01mm |
CNC | Japan | 1 | ±0.01mm |
NC | Japan | 2 | ±0.01mm |
QC instruments:
Measuring Instru-ments | From | Quantity | Accuracy | ||
Mitutoyo height gauge | Japan | 4 | ±0.001mm | ||
Sony height gauge | Japan | 1 | ±0.001mm | ||
HRC tester | China | 1 | |||
High speed steel PIN gauge | Taiwan | 2 set | |||
Carbide PIN gauge | Taiwan | 1 set | |||
Carbide metric Gauge block | Taiwan | 1 set | |||
TRIMOS VT600MA height measuring instru-ment | Switzerland | 1 | ±0.001mm | ||
Profile projector | China | 1 | ±0.005mm | ||
Optical micro-scope | China | 1 | 90x | ||
