Brand:SHJDE
Model:SK-6D
Press automatic pump controller
FEATURES:
1. Full electronic automatic control,reaching the international leading level.
2. It is able to cut off the power supply automatically under no-water condition or ultra-high voltage,protecting the water pump effectively.
3. With compact and exquisite structure,it can be randomly installed on water pump and pipeline.
4. With wide operating voltage and wide operating pressure range,it can be regulated randomly.
5. It requires no water storage tank or water tower,occupies little space,economical and energy saving.
6. Corrosion proof,rust proof,safety,environmental protection,strong interference immunity,long service life
MAIN TECHNICAL PARAMETERS
Working power supply | 110V, 230VAC±10%, 50/60Hz |
Max. load | 12A, 2.2KW |
Operating pressure range | 13.5 bar/14.5-50.65psi |
Max. withstand pressure | 12 bar/175psi |
Max. Liquid temperature | 90°C 250°CF |
Max. Flow rate | 80I/min |
Inlet/outlet aperture | "1" GSA male |
Ingress protection | IP65 |
Standard measure of the pressure gauge | Ø40mm 0:12bar 10:170psi 1/8 bspt |
Sk-6D full-automatic controller is especially designed for all control operations of
automatic water pumps.Once the pumping system comes across faults such as no water,
lack of water or block of suction piping,etc.This product would judge it as a foult
through electronic sensor,and the red lamp "FALVRE" goes on,meanwhile a group of
stop signal would be sent to the water pump,protecting the water pump motor from
being damaged or burnt due to no water working.After overhauling,please push down
the key "REST",the pumping system would restart.
The product is equiped with pressure gauge that is used to detect the starting pressure
and system pressure,which enables the users to regulate the setting value of operating
pressure easily.
