Brand:THINGWELL
Model:C-HP
Self-priming Pump Exclusively for resistance to Acid/Alkali-China model (Electroplating Equipment)
Features:
1. Shaft seal: no-stick-self-cooling device together with cool-recycling circuits suitable for
transportation of liquid used under high heat/corrosion environment as well
2. Very strong suctioning capability that can reach a height of 20 feet
3. Protective shield for shaft seal is designed to be disassembled for replacement in a convenient
manner
4. Inlet shall be provided with Ford valve or check valve to prevent the liquid from flowing back
upon occurrence of shutdown of the pump
5. Corrosion-resistant: pump is made of special plastic steel including FRPP to resist the
majority of acid/alkali liquids, and PVDF for resisting concentrated alkali
6. Service temperature: FRPP below 75°C; PVDF below 90°C; depending upon chemical.
Specification-China model:
Model | Diameter of inlet/outlet (mm) | The highest head (m) | Max Flow (L/mm) | Motor (HP) | Pole | Voltage / Hertz / Power source | Weight (kg) |
C-HP-40013 | 40 x 40 | 7 | 185 | 1/2 | 2 | 220-380V±10V 50-60Hz 3 phase | 25 |
C-HP-40012 | 40 x 40 | 13 | 240 | 1 | 27 | ||
C-HP-40022 | 40 x 40 | 19 | 300 | 2 | 36 | ||
C-HP-40032 | 40 x 40 | 25 | 380 | 3 | 40 | ||
C-HP-50032 | 50 x 50 | 21 | 410 | 3 | 41 | ||
C-HP-50053 | 50 x 50 | 26 | 450 | 5 | 83 |
- Pump flow should be based on tap water source.
- The above specifications are for reference only.
