Brand:TJK
Model:MB3000
Send Inquiry
TJK CNC Steel mesh bending machine
Products Introduction: The equipment is hydraulic bending steel mesh production line is applicable to the rapid devebpment to today`s construction industry needs design, the small size and easy to move, flexible variety of sizes, according to the demand curve at any angle between the 800-1800.
CHARACTERISTIC
1Independent hydraulic driving device.
2imported electricity components.
3Mesh bending control system easy for operate.
4Control panel easy for operate.
5imported hydraulic system.
6Control systems: Siemens, MITSUBISHI, Panasonic.
| Model | MB3000 |
| Supple voltage(v) | 380V 50Hz |
| Installed power(kva) | 18.5 |
| Control voltage(v) | 24V |
| Power cable cross-sectional area | 3*35mm2 +1*16mm |
| Max. pressure hydraulic systerm(pa) | 20 |
| Hydraulic system flow(L/min) | 90 |
| Range of steel processing(min) | ? 6-18mm |
| NO. of reinforced | 60or30 |
| Max. mesh width | 6000 |
| Grid spacing(mm) | 50mmor 75mm |
| Bending angle | 0-180 |
| Error processing point of view | ± 1 |
| Bending speed (rad/s) | about 30 |
| Operation temperature | 5-40 |
| Weight(T ) | 2.5 |
| Installation dimensions | 6000*1400*1400 |
| Model | MB3000 |
| Supple voltage(v) | 380V 50Hz |
| Installed power(kva) | 18.5 |
| Control voltage(v) | 24V |
| Power cable cross-sectional area | 3*35mm2 +1*16mm |
| Max. pressure hydraulic systerm(pa) | 20 |
| Hydraulic system flow(L/min) | 90 |
| Range of steel processing(min) | ? 6-18mm |
| NO. of reinforced | 60or30 |
| Max. mesh width | 6000 |
| Grid spacing(mm) | 50mmor 75mm |
| Bending angle | 0-180 |
| Error processing point of view | ± 1 |
| Bending speed (rad/s) | about 30 |
| Operation temperature | 5-40 |
| Weight(T ) | 2.5 |
| Installation dimensions | 6000*1400*1400 |
