Jaw crusher is the most widely applied Railway Stone Crusher. It is usually used as primary crushing during the stone or sand processing , because it's high capacity , large opening and durable wearing parts, it's easy to maintain.

Working Principle of Railway Stone Crusher:

The motor transmits raw material (stone) through belt to the movable jaw to do periodic motion towards the fixed jaw by the eccentric shaft. The angle between toggle plate and movable jaw plate rises up when movable jaw moves. So the movable jaw moves towards the fixed jaw, stone is crushed in this process.

The angle between toggle plate and movable jaw decreases when movable jaw moves down, the movable jaw moves leaves fixed jaw by pulling rod and spring, the final crushed stuff will be discharged from the outlet.

Operating Tips of Railway Stone Crusher:

1) The Railway Stone Crusher shall be put into operation only when it is running normally (Feed stone when the machine is started up).

2) Stone or other material shall be fed steadily and continuously.

3) Temperature of bearing shall not exceed 35 Celsius degree, the max temperature should not exceed 70 Celsius degree.Otherwise, stop the machine and examine at once.

4) Stop feeding before stopping the motor. Stop the motor only when all the stuff is discharged from the machine.

5) If the machine is blocked by the stuff, stop the motor at once. Start up the machine again when the blocked stuff is clean away.

Main Parameters of PE Railway Stone Crusher: