Type: Ege-25
Standard: Yd/t723.3-94
Thickness: Steel 0.155± 0.005, eaa 0.05± 0.005, total 0.255± 0.01
Color: White, green
Tensile strength: 300mpa
Elong at break: 15%
Peel strength: 6.13n/cm
Heat seal strength: 17.5n/cm
Filler/floodant hrs resistance 68± 1degree celsius, 168hrs: No delamination
Water resistance 68± 1degree celsius, 168hrs / peel strength: 6.13 n/cm
Dielectric strength / two-side, DC 1 kv, 1min: No break
Corrosion resistance: ≥ 7 grade

Product description
Ege-25 plastic clad metal consists of a steel tape coated on both sides with an adherent ethylene copolymer. The copolymer exhibits excellent adhesion to the steel substrate and has the chemical resistance and general characteristics of lower density polyethylene, it bonds to low, linear low, medium and high density polyethylene. The steel is low carbon, electronic chrome-coated steel tempered to t-2 condition for excellent formability and fabrication characteristics

Pancake type
Inner diameter: 76, 150, 406mm/3mm
Width: 12-600mm
Outer diameter: 650mm
Core material: Cardboard paper, steel/ plastic core

Storage
Pease keep the clean standard stock away from light direct irradiation, pollution and all kinds of mechanical outside force.

Handling
The skilled operator should take or lay the materials gently and carefully to avoid scrap and crash.

Remarks
The property mentioned above should only be regarded as a general guide to product properties and not as a guarantee. Some of the properties can be changed as a result of our efforts to improve the quality of our products. All listed method is just for reference, actual testing performed according to modified equipment and conditions.