First: Preprocessing, fast, effective proud: Car paint room is a set of large-scale equipment. Before use vehicles generally have to go through pre-processing. This not only eliminates the drawbacks of manual processing, improve working efficiency but also can improve the paintwork repair operations finish quality. This is not only because paint room operator can follow the settings so that uniform heating and rapid drying paint, and paint rooms can be isolated from the outside world to the paintwork caused by dust and other pollutants, the pollution, thus eliminating the need for subsequent polishing paint, etc. Surface processing.

Second: A good working environment. Automotive paint room paint room in order to maintain clean air, various types of paint rooms are equipped with filtration devices, such as cotton filters used to filter the air into the baking room in the dust, and paint room ventilation the system will have enough breathing room paint speed, thus ensuring the paint room air clean. In many cases, the body paint of the pollution is caused by human factors, such as when the paint has not been thoroughly cleaned the vehicle enters the paint room, or painting officer not wearing a special protective clothing, or paint the room dirty and so on.

Third: Efficient, quality is guaranteed. Compared with manual spray paint, paint, automobile paint rooms and mechanical "one-stop" services, work efficiency is higher shanghao several times, and even a few times. Moreover, the painting, the external air through the primary filter, after the fans sent to the roof, and then through the top of the filter into the room after the second filtration and purification. Room air-all-down type, to 0.2-0.3m / s speed of downward mobility, so that after the spray paint mist particles can not stay in the air, but directly through the bottom of a draft has been discharged outside the room. This constant cycle of conversion, so that when you paint the room air cleanliness 98%, and into the air with a certain amount of pressure, can be formed around the car a constant flow of air to remove excess paint, so as to ensure maximum quality of paint. Smooth finish even without impurities, polishing is high.

Fourth: A high safety factor. Automobile paint rooms are generally equipped with temperature controller and safety of explosion-proof systems. Automotive paint, it will be transferred to paint throttle position, hot air circulation, baking room temperature rapidly increased to a predetermined drying temperature (55 -60 ). Fans will be the beginning of the external filtered fresh air, and thermal heat exchange took place after the converter sent to paint room at the top of the air chamber, and then subjected to a second filtration and purification, hot air through the throttle the role of the inner loop, in addition to inhaling a small amount of fresh air, but the vast majority continue to be heated hot air is used to make paint room temperature gradually increased. When the temperature reaches set temperature, burner automatically stopped; When the temperature dropped to set the temperature, fan and burner also automatically open, so paint the room temperature is kept relatively constant. Finally, when the baking time to reach the set time, the paint room automatic shutdown, paint the end of construction safety.