High Power Handheld Signal Jammer ( For worldwide all Networks)
Mobile Signal Jammers partial applications
Technical Feature
Taking use of super-high frequency and mini-power interference technology, high efficiency...
Effectively making subsections. Just interfering downlink and no interception on the base station.
Extreme portability. The weight for machine itself and antenna are just 0.35KG
Slow start up design of circuit. These elements can maintain the stable operation condition with high integration.
Connection
Four SMA connectors which are used to connect with anternna (CDMA GSM/DCS PHS 3G/GPS ). One charging connector.
Accessories
This portable jammer consists of many subassemblies. They include mainframe(with built-in storage battery), different kinds of antenna, charger. We will make a brief introduction about the main subassemblies' function.
Charger AC220V/110V 12V
Meeting Room, Oil and Gas Storage Facilities, Oil and Gas Fields, Hospitals, Theatres, Recording Studios, Banks, Contract Tendering Rooms, Churches, Conference Rooms, Classrooms, Testing Facilities, Security Services, Military Units, Secret Services, News Conference Rooms, Libraries, Museums, Prisons, Courts, Border Patrol and Drug Enforcement, Customs, Houses.
This product can be used in any place where mobile phones and GPS L1are prohibited to be used!
Being familiar for use immediately
Now let us introduce this portable signal jammer to you and make you better understand about the positions of all the buttons as well as operational alway.
How to install Antenna and turn on the Device
To install the antennas, please try to screw the antennas tightly to the corresponding position on
The device according to the length remark on the device and antennas
The antenna connectors of Output power and working instruction LED on the Cover. Longer White line connect with antenna which are identified by CDMA GSM, DCS PHS, 3G and GPS as the indication accordantly, will be ON when the Power SW placed, Power LED shows green, then the machine to work.
How to Charge and When need to Charge
Please adjust the Power SW to be "OFF" position while charging for the jammers. And then you will find Charger LED will become Red. In the first three times, please try to charge for the jammer for 12Hours. Every time after only 6 hours of charge time.
Red light: When charging for jammer, the indicator light will be on. When the built-in battery is charged full, the indicator light will be off. When the power is not enough, the Power LED will be blinked and into red. It means you have to recharge for the jammer.
Notes:
1) Do not place the device directed to the sunlight or near the high temperature fires.
2) While it is working, the surface temperature is about 45 centigrade. It is normal. However, if it is higher than 45 centigrade, it is abnormal. Please put the power SW to OFF immediately and try to contact your local distributor or agent.
3) The shielding range of the device will be determined by the local signal strength. In different situation, it will be with different performance.
4) Please try to put the device in a higher position while it is working. It will be better. The suggested height is about 2M.
5) To avoid the loss of function of the device, please try to avoid the device placed on or the metal materials.
6) Do not put the device near computers, notebook computers, televisions, stereos, and radios and so on, in order not to make some interference for these equipments.
7) Do not turn on the power before the antennas is installed
8) If the antenna is not properly installed in accordance with the manuals, the shielding range will be not so good. Make sure the correct installation before turn on the power.
9) If the charged times is more than 500 times and then can not be charged any more, please contact your local dealer or dealer and replace the battery.
