Product Model PNE, TP-K
Product Description CTP Thermal Positive working plate
Other Description Digital Thermal offset Printing Plates
H. S. Code 3701.30.23.00
Plate type Positive working, infra-red sensitive thermal
Substrate Electro-chemically grained & anodized aluminum
Alloy Standard 1050 alloy
Standard Gauge Available 0.15mm, 0.20mm, 0.25mm, 0.30mm
Max Plate Size 1450mm on any 1-side
Plate Surface Violet Blue in colour, surface is non-matted
Spectral Sensitivity 800 - 850nm, peaks @ 830nm
Digital Energy (Exposure) 120 - 150 mj/cm2 depending on spectral fit
Run Length* Approx. 80, 000 impressions unbaked
Approx 500, 000 impressions post baked
*actual run length depends on press condition and image contect
Line & DOT Resolution 1 - 99% @ 250lpi
Developing Process By hand or by machine (auto-processors)
Recommended Developer PNE DFT-100, Kodak Goldstar Premuim
Processing temperature 21 - 25C, optimum at 23C
Processing time 20 - 30 sec, optimum at 23sec
Baking Conditions 250C for approx 1 -2 minutes
Safelight Normal daylight conditions
Storage Condition Temperature 15 - 25C; Humidity 40% - 70%, Stacking Height <1.5m
Shelf Life 12 months when stored in light free area away from excessive cold, heat & high humidity.