This item LED street light maily used in highwag, park, square, and etc. It has following feature:
1. LED light source modeled on the shape of high-pressure sodium lamp, LED light source is actually from the visual look for the shape of the traditional high pressure sodium lamp, the light form has been applied for patent.
2. The radiator cooling use a high superconducting technology, the cooling floor use Cu Mg Al materials so that made the heat source layer temperature up to 46 degrees, greatly increasing the service life of up to about 50, 000 hours.
3. Use the secondary grading system to improve the luminous flux, in line with lighting standards.
4. Using special wide angle light distribution(TK) point. Of view, the angle of 100 degrees, so that the lamp illumination to achieve uniformity
5.15-degree elevation angle to make the width of the road uniform illumination.
6. The shell is made of ADC12 die-casting magnesium alloy materials, light weight, good toughness with nation safety standards.
7. The light source of protection by glass, to prevent the rinsed sand to ensure the smooth flow.
8. Light control system use the automatic control devices, before Mid-night full load of work, after that work by half, it is a truly energy-saving product.
9. According to different requirements for road illumination, we can produce 3000K-6000K color-temperature products of different