Specifications
Rhomboid prisms
Size are available upon request
Custom-made non-standard
Rhomboid Prisms
Penta prisms can deviate an incident beam without inverting or reversing to 90° . The deviation angle of 90° Is independent of any rotation of the prism about an axis parallel to the line of intersection of the two reflecting faces. It is commonly used in Plumb Level, Surveying, Alignment, Range finding and Optical Tooling. The reflecting surfaces of this Prism must be coated with a metallic or dielectric coating. The standard Penta Prism reflecting surfaces are coated with aluminum or enhanced aluminum.

Attribute Specification
Material BK7
Tolerance (mm): ± 0.05
Angle tolerance: 30 sec.
Surface Quality: 40/20
Flatness (per 25mm@633nm): λ /4@any 25.4mm area
Reflectivity: R > 95% per face @400-700 nm
Coating: Uncoated, AR, HR, etc.

Note:
1. Custom-made non-standard Penta Prisms at any size are available upon request.
2. Besides Bk7, non-stand Penta Prisms made of other optical materials are availbale upon request.
3. Custom-made Penta Prisms with better flatness (
Than 40/20, or 20/10) are available up on request.
4. AR coating on the input/output surfaces are available. Please refer to page 30 for coating.
Specifications
Rhomboid prism, tapered prism, penta prism, reflecting prism, equilateral prism, etc.

Remarks:
Other specifications are on request, please send your drawing or parameters, we will be happy to manufacture for you