0.6/1 KV PVC insulated power cable/PVC cable /PVC insulated cable is used for electric power transmission and distribution lines

0.6/1 KV PVC insulated power cable

1). Standard: IEC60502, GB/T 12706

2). Voltage: 0.6/1KV

3). Specification:

Type
Designation
Application

VV
Copper conductor, PVC insulated, PVC sheathed power cable
For laying indoors, in tunnel or cable trench, unable to bear extermal mechanical forces. Single core cable is not permissible to lay in magnetic duct

VLV
Aluminium conductor, PVC insulated, PVC sheathed power cable

VY
Copper conductor, PVC insulated, PE sheathed power cable

VLY
Aluminium conductor, PVC insulated, PE sheathed power cable

VV22
Copper conductor, PVC insulated, steel tape armoured, PVC sheathed power cable
For laying indoors, in cable trench or direct in ground, able to bear external mechanical forces, but unable to bear pulling force

VLV22
Aluminium conductor, PVC insulated, steel tape armoured, PVC sheathed power cable

VV23
Copper conductor, PVC insualted, steel tape armoured, PE sheathed power cable

VLV23
Alunminium conductor, PVC insulated, steel tape armoured, PE sheathed power cable

VV32
Copper conductor, PVC insulated, steel wire armoured, PVC insulated power cable

For laying indoors, in cable or direct in ground, able to bear external mechanical forces, but unable to bear large pulling forces

VLV32
Aluminium conductor, PVC insulated, steel tape armoured, PVC sheathed power cable

VV33
Copper conductor, PVC insulated steel wire armoured, PE sheathed power cable

VLV33
Aluminium conductor, PVC insulated, streel wire armoured, PE sheathed power cable

Note: The armoured single core cables is only used for D. C. System. As for A. C. System, non-magnetic armored material should be applied

4). Nominal cross-sectional areas: 1.5 mm2, 2.5 mm2, 4 mm2, 6 mm2, 10 mm2, 16 mm2, 25 mm2, 35 mm2, 50 mm2, 70 mm2, 95 mm2, 120 mm2, 150 mm2, 185 mm2, 240 mm2, 300 mm2 400 mm2 500 mm2 630 mm2 800 mm2

5)production range: Single core cable from 1.5 mm2 to 800 mm2, muli-core cable from 1.5 mm2 to 400 mm2

6). Operating characteristics:
. Rated power-frequency voltage u0/u: 0.6/1 KV
. Max permissible continuous operating temperature of conductor 70
. Max short-circuit temperature of the conductor shall not exceed (Max 5 seconds duration): Cross-section of conductor 300 mm2
. The anbient temperature under installations should not be below 0
. The bending radius of single core cable should not be less than 20 times of the cable diameter, the bending radius of multi-core cable should not be less than 15 times of the cable diameter