Features:
Thermoplastic enclosure
Bi-stable contact
Long lifetime
Non-contact functioning
Surface and direction of actuation marked by colored symbol
Mounting with two M4 bolts
Spade connector 4.8 mm
With pre-wired cable, 1m in length

Info:
Spade connector 4.8 mm and 1 additional shielding plate
Spade connector 6.3 mm and 1 additional shielding plate
Cable outlet and 1 additional shielding plate

Functions:
The opening and closing of the switch is dependent on the direction of actuation, the strength and polarity of the actuating magnet.

Application:
Applied in elevator level transducer, limit switches and other industrial and civil use of non-contact switch.

Technical data:
Design: Square
Enclosure: Fibreglass reinforced thermoplastic
Mounting Type: Two M4 screws
Termination: 4.8mm spade connector 4.8 mm; 6.3mm spade connector; Cable length 1 m
Operating principle: Magnetic
Switching voltage: Max. 250 VAC
Switch current: Max. 3 A
Switch capacity: Max. 120w
Dielectric strength: >800VAC
Switching power: M120W
Switching speed: Max. 18 m/s
Switching frequency: Max. 300Hz
Operating time: Max3.5s
Bounce time: Max. 0.5s
Release time: Max. 0.5ms
Operating temperature: -25° C to +75 centigrade
Mechanical life: 109 times
Electrical life: (1 million - 1 billion operations, depending on load)
Shock resistance: 50g/11ms
Vibration resistance: 35g (sinusoidal vibration)

Notice:
The actuating magnets are not included in the scope of supplies of the switch.
Please choose the appropriate actuating magnets according to the use of magnets.