LED Twinkle Light, Twinkle Light, LED String Light, Christmas Light, LED Light, LED Holiday Light)

Features:
1) Full RGB LED string light.
2)Indoor and outdoor use
3)Rated at over 100, 000 hours of use
4)Virtually unbreakable
5)No adapter required
6)Steady light or self-control

Application:
It is widely used for decoration of trees, buildings, streets, festival decoration and party ornamental.

How To Install LED String Light:
1. Careful handling is suggested when installing the LED String lights, make sure you do not cut or damage the cord insulation.
2. When attaching the mounting clips, use nails or screws for wooden surfaces; And use screw anchors and screws for cement surfaces. Use appropriate clips to mount LED string lights into corners or place edges.
3. Use cable ties to attach LED string lights onto fences, railings, trees or poles.

How To Extend String Light:
1. Turn off the power switch, or unplug the LED string light from the power line.
2. Connect the male connector of the extension string to the end female connector of the last LED string. Make sure the connectors are firmly connected and secured.

Caution:
1. Do not exceed the maximum number of extensions.
2. The maximum total number of LED string lights connected together through end connectors is 30 strings. If there are more LED string lights to install, install them in one or more separate groups.
3. All units must be unplugged prior to adding any additional string lights.
4. Make sure all connections are tightly secured.
5. Before replacing a LED bulb, make sure to unplug the LED string. Never turn or twist the bulb, pull it straight out from the lamp-holder. When replacing the new bulb, grasp the lower part of the bulb and press it straight into the lamp-holder and make sure it plug in the right direction and be secured.