HPXC18-DYAG POWER SUPPLY FOR LASER CUTTING MACHINE

Main Features:
1. Hybrid control of SCM(Single chip) and analogous circuit realizes easy and reliable control function.
2. Adopted constant and voltage regulation (applied on new system) technology ensure this power supply has stable output and high control accuracy.
3. Adopted new big power and high frequency IGBT module during power conversion lets
This power supply has large margin.
4. Multiple protections during power conversion avoid fault broadening.
5. Intelligent fault detection simplifies fault elimination.
6. Preset output parameters can be operated(applied on new system) on upper monitor (computer). It reduce complex operation.
7. Preset output parameters can be operated(applied on new system) on upper monitor (computer). It reduce complex operation. 8. Modular design optimizes production and maintenance.
9. Complete high frequency design let operator doesn't worry about power supply's frequency.
Specification:
1. Input voltage: AC380± 10% 50/60Hz
2. Control current: 100A-400A.
3. Pulse width: 0.2ms-20ms.
4. Pulse width: 0.2ms-20ms. 5. Output power≤ 9KW(single lamp), ≤ 18KW(double lamps)
6. Parameter setting: Max 100 waveform parameter can be set, each waveform is composed
By current, pulse width and frequency.
7. Environment: Operating temperature: -5--40degree, Relative humidity: (Without dew)< 80%, Dust: Less than 0.01G/M3
8. Size:
: Integrative type
Split type
L× W× H=482× 525× 267(mm)(Cabinet)
L× W× H=482× 525× 200(mm)(cabinet2)
Double lamps: L× W× H=482× 525× 267(mm)(Enclosure 1)
L× W× H=482× 525× 200(mm)(Enclosure 2)