I. Introduction
Inside each light are equipped with LED, photo switch, infrared sensor, power converter. And the base is Edison base or bayonet base. No switch is needed, It is fairly easy to install and take down. With neither heat emission nor electromagnetic interference, it saves energy and has a long work life. Housing of the LED induction light is made of high level fire-resistant material.
With high-performance integrated circuit and constant current circuit, it acquires parameter uniformity and wins customers with reliability.

Functions: In the dark or dusk (ambient aluminous≤ 1 lux), this light will turn on automatically if there is one walking or moving within its induction area, and keep lighting about 1 minute after the effective walking or moving stops.

Suitable for: Corridor; Washing Room; Front Door; Cloak Room; Ware House basement, Garage; All kinds of passageways, and so on.

II. Technical Parameters
Item
Terms
Value
Unit
1
AC Input Voltage
180260
V AC
2
Maximum Rated Power
4.5
W
3
Static Power Consumption
100
M W
4
Luminous Flux
300
Lm
5
Light Radiation Angle
160
Degree
6
Induction Angle
90
Degree
7
Induction Distance
4~5
Meters
8
Lighting time of delay
3060
S
9
Dimension ( Diameter/ Length)
50/75
Mm
10
Weight
50
G

III. Usage Cautions:
When being installed, the LED induction light must be far away from heat or cold producers such as heater, air conditioner, microwave oven, and producers of electromagnetic field.

Make sure that the Induction window/Fresnel lens is not faced to windows, or areas where air flow and light great. Its induction distance may become shorter when the ambient temperature is higher than that of human bodys, and this is normal.