Coaxial cable is typically
Identified or classfied according to its impedance or RG type coax
Coaxial cables are used in many different application fields, e.G.:
Aerospace industry
Telecommunications
Radio/television
Video system
Various types of measuring equipment
Computer system
Media devices:Scanners, imaging equipment
Military equipment and armament systems

The company possesses advanced production equipment and experienced technical staff.All products are tested strictly and their data reach national and relative international standards.
Construction

1.CENTER CONDUCTOR:Center conductor is copper or metallurgically bonded copper clad steel (aluminium) with high-frequency transmission specifications.
2.ConDUCTOR ADHESIVE:The center conductor is coated with a proprietary polymer adhesive to seal the dielectric to the center conductor.This adhesive ensures the dielectric is bonded to the center conductor to prevent moisture migration.
3.DIELECTRIC(INSULATION) FOAM:Dielectric foam is a gas-expanded,closed cell polyethylene .
4.FIRST SHIELD:The first shield is a laminated Aluminum-Polypropylene tape providing 10% coverage of the dielectric.This tape is axially applied with a minimum 18% overlap and is fully bonded to the dielectric to minimize signal leakage and insure long-term reliability.
5.SECOND SHIELD:The second shield is braided bare 0.15mm Aluminum alloy wire(tinned copper).This provides additional shielding and improves mechanical strength.
6.THIRD SHIELD:An unbonded A-P-A tape provides the extra shielding needed in some high RF interference environments.
7.FOURTH SHIELD:Braided bare 0.15 mm Aluminum alloy wire (tinned copper).
8.ANTI-MOISTURE COMPOUND
9.JACKET:An environmentally sealed construction is achieved by applying PVC or PE protective jacket over the braid.
10.MESSENGER:The jacketed cable is supported by a galvanized steel wire attached to the cable jacket by an easily separable web.