Specification:
Starting part: 12V battery choose 12V starting and 24V battery choose 24V starting. Starting current classified as high, medium and low 3 stalls. Adjust the stalls according to the requirement of starting current.

1. Starting 12V motor: When the power of battery is not enough or bigger current is needed to start, you can use starting power.
Connect the starting output plug of starting power: Connect the red clamp line"starting+"with the "+"of battery, connect the black clamp line "-12V"with the "-"of battery. Set the voltage option as "12V" and the current option as low starting stall. Switch on the power, start the motor according to instructions. Usually starting for one time takes about 10-15s. If failing to start for one time, switch off the power, set current option as medium or high stall, then restart.

2. The method of starting 24V motor is the same to starting 12V motor. Connect the output line with the 24V plug
Relative
Input alternating power(V. Hz) 380V 50Hz
Starting input currentA: 95
Starting output currentA: 1500A
Charger input currentA: 5A
Charger output currentA: 80A
Starting output voltageV: 12V 24V
Charger outputvoltage V: 12V 24vV
Starting output maximum power KW: 36KW
Charger output maximum power KW: 2kw
The capacity of the galvanic batterAH: <500ah
Dimension MM: 450*380*745
WeightKG: 60KG
Starting time: <10s