Performance as follows:
1. Good performance of alkaline-resistance
2. High tensile strength and deformation-resistance
3. Excellent self-adhesive performance
4. Simple and easy to be applied

Application
Repair the crack and joints or holes of drywall, plasterboard, stucco; And repair other damages in other wall surface.

Specification
Width(mm): 25, 35, 48, 50, 100, 150, 200, 1000, 1500 or wider
Length (m): 10, 20, 30, 45, 90, 153 or loner
Mass: 50-85g/m2
Mesh: 7*7, 8*8 or 9*9 mesh/inch
Color: White, yellow, blue etc.
Other specifications are available upon request.
Testing standard: ASTM-D579

Direction of Appication:
1. Wall must be clean and dry
2. Center and apply tape over the length of the joint, pressing firmly
3. Apply a generous first coat of compund over the and through the mesh, making sure to competely fill the joint crevice. When the joint has been completely filled, wipe off any excess compound with the drywall knife leaving enough to cover the tape.
4. Let dry completely, then sand slightly.
5. Apply sufficient thin finishing coats to produce a smooth wall surface.
6. Cut or butted boards do not have a tapered edge. Therefore, special Care must be taken to assure proper compound penerration of all joints. This may result in slight build-up of compound that will require an increased amount of edge feathering.

Caution
1. Failure to completely fill the joint may result in cracking.
2. For best results, use a setting-type compound.