Mechanical specification:
Operating temperature: -10 to +70 degrees Celsius
Operating torque force: 30~200gf. Cm (5 degrees to 35 degrees)
Soldering heat: 300 degrees Celsius, 3 sec.
Terminal strength: A static load of 200gf shall be applied to the tip of the terminal in any direction for 10 sec.
Shaft wobble (mm p-p): Within (0.7 x L/30) mm p-p L = shaft length
Push-pull strength: Equal or greater than 8kgf. Cm
Electrical specification:
Output signals:
A and B, 12, 20 (for EC11 series) pulses/resolution, 360 degrees endless
A and B, 12, 24 (for EC16 series) pulses/resolution, 360 degrees endless
Rating: DC 5V, 0.5mA (at each bit)
Contact resistance: 1 ohm max.
Chattering: 3mS max. (time of voltage change from 3.5V to 1.5V or from 1.5V to 3.5V)
Sliding noise (bounce): 2mS min. (time voltage exceed 1.5V in Code-ON area)
Sliding noise: 3.5V min. (voltage change in Code-OFF area)
Phase-difference:
0.25T +/- 0.1T
0.15T +/- 0.1T
0.075T +/- 0.05T
Insulation resistance: 10M ohms max.
Dielectric strength: For 1 minute or more (at 50VAC)
Endurance:
Rotational Life: Equal or greater than 50, 000 cycles
A wide range of variable resistors/potentiometers available