Ust812ss, 1-2 splitting output for remote input source via 0-30m extension VGA and audio input shield cable.

Building RGB and sync signal ground loop block filter, unbalanced to balance, and loop termination circuit for remote VGA input switching channel.
Building audio ground loop block isolation transformer, unbalanced to balance, and loop termination circuit for remote audio input switching channel.
Common mode noise rejective VGA audio filtering receiver as remote input switching channel, working for harsh environments.
Outstanding interference rejection filter and transient surge protection in remote input channel, ESD protection circuit in case of output floating.
On line hot plug VGA audio input and output cable to connector support.
No power required, up to -68dB channel isolation and equipped in metal housing.
For more information, please contact with authorized distributors.

Specification
Attenuation
1m to 100MHz 1.5 dB max
Remark: Passive solution for 1to2 VGA splitting, user can increase displayer/monitor brightness for adjustment
* active buffered output version/model optional

Common-mode rejection
1KHz to 5 MHz: 62 dB typical

Channel isolation
Up to -68dB channel isolation

Impedance
Input /output impedance 75 ohms

Connector interfaces
Audio: 3.5mm earphone jack connector
VGA: 2 inputs, 2outputs, 4 dB15 female connectors

Environmental
Temperature: -40 to +85° C
Humidity (non-condensing): 0 to 95%
ESD susceptibility (200 pf probe): 2 kv

Mechanical dimensions no excluding cable: 160x58x33mm (lxwxh).

Weight: 350g

Material: metal housing case

Mounting: No needed

Package: Paper box