1. AL Conductor XLPE insulated PVC sheathed internal steel tape armoured power cable.
2. Rated voltage is 0.6/1 kv
3. D. C. Resistance of conductor at 20 degree according to GB3957-83 or IEC 228-78.
4. Power frequency withstand voltage test for 5 mins, no breakdown at 3.5 KV
5. Hot set test for insulation, 200 degree15 mins with pressure 20N/cm2; Max. Elongation at road, not greater then 175%.
6. Max permanent elongation after cooled 15%.

7. Power frequency withstand voltage test for 4 hours, no breakdown.
8. The maximum operating temperature of cores shall not exceed 90° , when the cable is used for long period, the temperature of core shall not exceed 250° At short ciruit for seconds.
9. The installation of cables is not limited by the difference of level along the route. The ambien temperature should not be below 0° During installation. The minimum bending radius shall not be less than 10 times of the cable overall diameter when laying.

Standards
Our cable is manfacturered according to GB12706-91 or IEC60502. It is suitable to be installed in the power line with rated voltage of 0.6/1kv( Uo/U) for transmitting electricity.

Applications
For laying in doors, in tunnel and in the ducts and underground. Able to bear extrenal mechanical force but not large forces. Impermissible to use single core cable in A. C. Circtit.

Our same models have many different size for the nominal cross-sectional area and nominal thickness of insulation.

OEM orders are welcome.