1) Connect the 3 foot power cable to an available AC power outlet. once plugged in, you can now plug devices in to the
MASTER, SLAVE and NORMAL ports on your surge protector so that they can receive power.
2) Devices plugged into the MASTER port will receive power as long as your surge protector is plugged in, and the device is
Powered on. When devices plugged into the MASTER port are powered on, then devices plugged into the SLAVE ports will
Also turn on. When devices plugged into the MASTER port are turned off, devices plugged into the SLAVE ports will
Automatically power off as well.
NOTE: When a computer is plugged into the MASTER port, devices plugged into the SLAVE ports will power off when the computer
Goes into sleep or hibernate modes. When the computer awakens from sleep or hibernate modes, devices plugged into the SLAVE
Ports will power back on.
3) Devices plugged into the slave port will receive power only when there is a device plugged into the MASTER port, and the
Device plugged into the MASTER port is powered on. If there is no device plugged into the MASTER port, then devices
Plugged into the SLAVE port will not power on. Furthermore, if the device plugged into the MASTER port is not powered on,
Any device plugged into the SLAVE port will also be powered off.
4) Devices plugged into the NORMAL port will receive power as long as the surge protector is plugged in, and the device is
Turned on. Devices plugged into the NORMAL port do not affect the power status of devices plugged into the SLAVE ports
And are not afected by the power status of devices plugged into the MASTER port.
5) On the side of your device is a reset button. If your device ceases to work properly, pressing this button will assist your
Device in resuming normal function.