1. UK Remote Socket, range up to 40m

2. TUV GS PAHs RoHS CE certificate,

3. German/French Plug for option. 1000W/3600W

Radio Control Socket 1V1 ZTC-S316A

The Remote Control Scket consists of two separate units:

Remote Control Unit Transmitter)

Socket Unit(Receiver)

These units completely self-contained and connective wiring is not required. Additional single sockets can be added; One remote control could operate with maximum of 16 pieces of socket at the same time.

Remote Control Unit(Transmitter)

The Remote Control Unit is operated by 1x12V, 23A battery (included)

Slide off the battery compartment door on the unit

Insert 1x12 V, 23A battery and close the battery compartment door. The remote control is now ready to use.

Socket Unit(Receiver)

Simply plug the Socket unit into any standard AC 230V/110V power and it is ready to use.

You can connect the lamps, TVs, CD and many oher small electrical appliances to the Socket Units, with wattage not mare than the limit which is marked on the back of each Socket Unit(1000 watt or 3600 watt)

You could control on or off of the electrical appliances manually by press the "ON/OFF" button on the Socket Unit for a very short time.

Remote Operation Button Set Up

Step 1

Plug the Socket unit into any standard AC 230V/110V power

Step 2

Press the button "ON/OFF" on the Socket don't release, then press the "on" or "off" button on the remote controller which you want to control the socket, unit for 2-3 seconds, you can feel the ticktack of tact switch in the socket than release.

Step 3

You can set up each buttons to control different Socket in the same way

Step 4

If you forget which button to control the appliance or if you want to change another button to control the Socket repeat the process from Step 1 to Step 3 AND CHANGE THE CHANNEL

important: Be certain that the electrical appliance itself is switched to the "ON" positon when connected with the Socket unit

Technical Parameters of ZTC-S316A Remote Control Outlet:

Model: ZTC-S316A

Transmission range: 45m(open area)

Frequency: 433.95MHz

Packing: Blister

Max working voltage: 230V/50-60 Hz or 120V/50-60Hz

MAX resistance load: 3600W

Approval: CE, Ramp; TTE, RoHS, TUV GS

FUNK SCHALTER SET

Funk Steckdosen Set