Type "Y": Good abrasion resistance, crushing-resistance, impact resistance, small compression deformation and Easy installation.

Working pressure 40MPa,
Temperature - 35-80 ° C,
Surface speed 0.5 m/s

Type "YB": Good abrasion resistance, extrusion-resistance, impact resistance, small compression deformation and Suitable for harsh working conditions.
Because of the existence of stress medium between the two lips, it has sufficient lubrication to improve sealing ability under zero pressure.
Easy installation

Working pressure 40MPa,
Temperature - 35-80 ° C,
Surface speed 0.5 m/s

Type "YO": Especially strong wear resistance, insensitive for shock load and pressure changes, with sealing function under zero pressure and low temperature. Suitable for harsh sealing conditions and easy installation.

Working pressure 35MPa,
Temperature - 35-95 ° C,
Surface speed 0.5 m/s

Type "YOB": Installing a ring at the oil seal bottom to increase the impact resistance, Good abrasion resistance, impact resistance, small compression deformation and suitable for harsh working conditions
Because of the existence of stress medium between the two lips, it has sufficient lubrication to improve sealing ability under zero pressure
Easy installation.

Working pressure 50MPa,
Temperature - 35-80 ° C,
Surface speed 0.5 m/s

Type "YY": Oil seal combined by NBR and TPU
Seal ring hardness of NBR is 60 to 75 (Shore A)
Seal ring hardness of TPU is 85 to 95 (Shore A)
Installing a ring at the oil seal bottom to increase the extrusion resistance.
Good abrasion resistance, impact resistance, small compression deformation
Because of the existence of stress medium between the two lips, it has sufficient lubrication.
For the rubber has the prepressing function, sealing will perform better under low pressure.
Easy installation.

Working pressure 50MPa,
Temperature - 35-80 ° C,
Surface speed 0.5 m/s.