General of insulation piercing connector(IPC)
1. Piercing connector, simple installation, need not strip the cable coat.
2. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead.
3. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector.
4. Adopted special connecting tablet, apply to joint of Cu(AI)and Cu(AI) or Cu and AI.
5. Small electric connecting resistance, impulse current can be up to 15kA.
6. Special insulated case body, resistance to illumination and
7. Arc surface design, apply to connection with the same(different)diameter, wide commection scope(1.5mm^2-240mm^2).

Performance testing
1. Mechanical performance: The grip force of the wire clamp is 1/10 bigger than the break force of the lead. It comply with GB2314-1997.
2. Temperature rise performance: Under the condition of big current, the temperature rise of connector is less than that of connection lead.
3. Heat circle performance: 200times per second, 100A/mm^2 big current overload, the change of connecting resistance is less than 5%.
4. Wetproof insulation performance: Under water for 30cm, input over 3. 5kV voltage for 1 min, no break out.
5. Resistance to corrosion performance: Under the condition of SO2 and salt fog, it can do three times of fourteen days circle testing.
6. Environmental aging performance: Under the circumstance of ultraviolet. Radiation, dry and moist, expose it with change of temperature and heat impulse for six weeks.