Products with max. Service temp. Of 650C are also available here.

CALCIUM SILICATE PRODUCTS
based on 1000C Standard Type, the temp. Limited of this type is improved to 1100C. As our paten, High Temp. Type can be used for high temp position of industrial furnaces.

Items Unit LAIGE Brand
SCS-25
Bulk Density kg/m3 250+_10%
Flexural Strength MPa ??0.50
Temp. Limit C 1100
Linear Shrinkag % ??2(1050C, 3hrs)
Themal Cond W/m@k ??0.058+_0.00011t
Block Sizes and Dimensional Tolerances
Length(+_3mm) Width(+_3mm) Thickness(+3 -1.5 mm )

*Auxiliary Products
BP-1 high temp. Adhesive powder-blended with water glass to form a mortar for the tight connection between insulating slab and other constructural component. (BP-1 consumption: about 3.0kg/m2)
WP-1 waterproof agent-covered on the surface of ready-constructed slabs in order to spread castables on it. (WP-1 consumption: about 0.8kg/m2)

PASTE TYPE CALCIUM SILICATE COATING
Items Unit Index
Paste Density kg/m3 1000
Paste Bulk Drying Shrinkage % 20
Temp. Limit C 850/1000
Drying Density kg/m3 260
Themal Cond W/m@k 0.06

Characterized by low drying shrinkage, good thermal stability, resisting alkali, weak acid corrosion and oil water soak, good adaptability, easy construction and no environmental pollution, Paste Type insulation coating can be widely used for all types of furnaces, kiln, tower, pot, pipe, valve etc, especially easy construction for special-shaped equipment.
Also we have dry insulation coating and 1260C paste.

Construction Area:
Each ton paste can cover an area of 70-80m2 with 10mm thickness. The area of other thickness can be calculated from this.