HNK's Flat FTTH Drop Cable is used in high speed and broadband telecommunication applications. It is suitable for both indoor and outdoor applications. The indoor fiber construction comprises of 1,2,4 cores optical fibers, 2 parallel FRP (Fiber Reinforced Plastic) strength member and LSZH Jacket. Outdoor FTTH flat cable construction is similar to the indoor cable, except the cable jacket is made of Flame Retardant Black PE and has a supporting wire for aerial installation.
Fiber used in these cables are bend insensitive and can be used for applications where multiple bends are present. These light weight cables are suitable for direct installation in Villas, Multi dwelling units and have excellent crush and impact resistance properties.

Feature:
.Special low-bend-sensitivity fiber provides high bandwidth and Excellent communication transmission property;
.Two parallel FRP strength members ensure good performance of crush resistance to protect the fiber;
.Simple structure, light weight and high practicability;
.Novel flute design, easily strip and splice, simplify the installation and maintenance;
.Low smoke, zero Halogen and flame retardant jacket;

Specification:

Performance  Units  Single mode ITU-T G.657A
Attenuation (dB/km)  dB/km  ≤0.4 at 1310nm ≤0.3 at 1550nm
Fiber Count  cores  1, 2, 4
Fiber Coating color    Red, Green, Blue, White
Cable Outer jacket color    Black, White, Grey
Cable Dimension  mm  3.1*2.0 (1-2cores indoor);
4.1*2.0 (4cores indoor);
5.3*2.0 (1-2cores outdoor);
6.1*2.0 (4cores outdoor);
Mode Field Diameter  μm  8.6±0.5
Mode Field Concentricity  μm  ≤0.8
Cladding Diameter  μm  125±1.0
Cladding Non-Circularity  %  ≤ 1.0
Coating Diameter  μm  242±10
Bending loss (Bare Fiber) Radius: 7.5mm x 1 turn  dB  ≤0.5 at 1550nm
minimum bent radius  mm  15
Storage Temperature  °C  -40~60