Model:HY-Y
Plastic bottle blowing machine From 3L to 10L ♥HY-A4 is the fastest liner blow molding machine in mainland of China by now. HY-A4 reaches around 4200BPH for 350ML bottle. Its baking tunnel is separated from the blow station so that time for mold opening is shortened with a result of speedy blowing and high output, damage to machine is lessened so as to keep reliable performance and prolong service life, as well as machine runs more smoothly and steadily.
4 cavity mould | finished product | quality goods mould |
♥HY-A4 automatic stretch blow molding machine is equipped with patented preform loading system, which consists of two manipulators: rectilineal manipulator and overturning manipulator. The rectilineal manipulator moves preform with neck up to the preform holder, after heating, the overturning manipulator grips heated preform and overturn 180 put preform to blow station with neck down. After stretching and blowing, the bottle is taken off by overturning manipulator. The specially designed preform loading & bottle discharging system avoid possible damage to preform & bottle during transportation
3-10L bottle blow moulding machine Plastic bottle blowing machine
| semi auto bottle blow molding machine,Output:1500items/hr | semi auto bottle blow molding machine,output:2500 P/H,one to leave four | Auto bottle blow machine capactiy:3600 P/H |
Control system
Together with HITECH Man-Machine Interaction (MMI) control panel with user-friendly, the whole control system presents super performance with precise control, convenient parameter setup, obvious display and reasonable memory.
| 500-2000ml machine details | 5L bottle blowing machine details | Full auto bottle blowing machine details |
Operation:
The standard operation of HY-A4 stretch blow molding machine includes four steps as follow
Step 1. Put the preform into preform container and the conveyer will take the preform to orientation units automatically.
Step 2. Load the preform at neck up to preform holder, and then preform is conveyed into baking tunnel.
Step 3. After heating, preform is conveyed into the blow station, then close the mold, stretch and blow under low pressure and high pressure, exhaust, open the mold.
Plastic bottle blowing machine From 3L to 10L Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
Air filter | Air cold dryer | High pressure air compressor |
Warm reminder
Angel drinking water equipment co.,ltd all staff warmly welcome new or old customers come for consultation, we will be making detailed project plan, to realize low cost, high efficiency and scientific process combination. In order to make bottle blowing machines achieved your ideal requirements.( Plastic bottle blowing machine From 3L to 10L )
