Model:DS60
Send Inquiry
Technical parameters of DS60 Injection Mould Machine is as follows:
| Description | UNIT | DS60 | |
| A | B | ||
| Shot volume | cm3 | 58 | 86 |
| Shot weight(ps) | g/oz | 50 | 78 |
| Screw diameter | mm | 25 | 28 |
| injection pressure | mpa | 268 | 214 |
| Screw I/D ratio | 22:1 | 22:1 | |
| Screw stroke | mm | 40 | |
| Screw speed(stepless) | rmp | 0-390 | |
| Clamping force | KN | 550 | |
| Opening stroke | mm | 270 | |
| Platen size | mm×mm | 540×540 | |
| Space between tie bars | mm×mm | 310×310 | |
| Max.daylight | mm | 570 | |
| Mold thickness(min-max) | mm | 130-300 | |
| Hydraulic ejection stroke | mm | 80 | |
| Hydraulic ejection force | KN | 28.4 | |
| Ejector pin | 4+1 | ||
| Hydraulic system pressure | mpa | 17.5 | |
| Punp motor | kw | 11 | |
| Heating capacity | kw | 5.75 | |
| Number of temp control zones | 4 | ||
| Oil tank capacity | L | 205 | |
| Machine dimensions | m×m×m | 3.9×1.15×1.51 | |
| Machine weight | kg | 2500 | |
