Model:JK80
Send Inquiry
1. Machine name:JK80 Automatic Extrusion Blow Molding Machine
2 Circuit system: Mitsubishi PLC + man and computer interface+Mitsubishi temperature controlled moldule
| General Term | Technical parameter |
| JK80 |
| Material | PE,PP,PVC,PA…. | ||
| Max container capacity | L | 30 | |
| Number of die | set | 1,2,3,4 | |
| Output(dry Cycle) | pc/hr | 600 | |
| Machine Dimension(L×W×H) | M | 4.3×2.2×3.6 | |
| Total weigh | ton | 11.5 | |
| Clamping Unit | Clamping force | KN | 260 |
| Platen opening stroke | mm | 400-900 | |
| Platen size | mm | 880 × 1150 | |
| Max mould size(W×H) | mm | 700×680-500×1000 | |
| Mould thickness | mm | 410-550 | |
| Power | Max drive | KW | 67 |
| Total power | KW | 97 | |
| Fan power for screw | KW | 0.9 | |
| Air pressure | Mpa | 1 | |
| Air consumption | m³/min | 0.9 | |
| Average energy consumption | KW | 32 | |
| Extruder unit | Screw diameter | mm | 80 |
| Screw L/D ratio | L/D | 25 | |
| Plasticising capacity | Kg/hr | 140 | |
| Number of heating zone | zone | 5 | |
| Extruder heating power | KW | 20 | |
| Extruer driving power | KW | 37 | |
| Die | Max. Volume | L | 4.8 |
| Power of die heating | KW | 18 | |
| Max die-pin diameter | mm | 250 | |
| Platen distance | mm | 410 | |
| Point of MOOG | mm | 30 |
