Model:B80
Send Inquiry
B80 Model automatic large extrusion blow molding machine --- This model adopts fixed mould open-closing system and accumulator die. Parison programmer is available to control thickness.This model is automatic process with low noise, saving energy,high efficiency, safe operation, easy maintenance and other benefits. This model is widely used to produce chemical barrel, auto parts(water box,oil box,air-condition pipe,aoto tail), toys(wheel,hollow autobike, basketball stands,baby castle), tool box,vacuum cleaner pipe,chairs for bus and gymnasium,etc.This model can produce max 40L hollow plastic product.
Parameter | ||
| Model | B80 | |
| Station number | Single station |
|
| Screw diameter | 80mm | |
| Max product volume | 40L | |
| Output(dry cycle) | 360 pc/hr | |
| Suitable material | PEPPABS... | |
| Screw L/D ratio | 24(L/D) | |
| Screw motor power | 30KW | |
| Screw heating power | 21.4KW | |
| Number of screw heating zone | 4 zone | |
| Plasticising capacity | 110 kg/hr(HDPE) | |
| Oil pump motor power | 11KW | |
| Clamping force | 200KN | |
| Stroke of mould board | 400900mm | |
| Mould board size | 880900mm | |
| Max mould size(W*H) | 6001000mm | |
| Thickness of mould | 450510mm | |
| Number of moulds | 1set | |
| Accumulator die capacity | 6.6L | |
| Max die pin diameter | 350mm | |
| Heating zone number die | 4 zone | |
| Heating power of die | 21.3KW | |
| Blowing pressure | 1Mpa | |
| Air consumption | 0.8m3/min | |
| Max drive power | 41KW | |
| Max total power | 52KW | |
| Fan power for screw | 0.72KW | |
| Average consumption | 26KW | |
| Electric Power | 3phase,220/380V,50/60Hz(can be made to order) | |
| Overall size(LWH) | 4.72.64.0m | |
| Weight fo machine | 12T | |
| Auxiliary equipments | Air compressor | 1.22m3/min,1.25Mpa,11kw,0.3m3 1set |
| Air tank | 1m3/1.2Mpa 1set | |
| Mould temperature controller | 6KW 1set | |
| Basic features | ||
| Clamping system | Fixed mould open-closing system | |
| Extrusion system | Hard gear surface reducer+import inverter | |
| Die system | Accumulator die | |
| Hydraulic system | import hydraulic valve and seal+proportional control | |
| Control system | Japan PLC+import touch panel+PLC automatic temperature control model+import electronic parts | |
| Note: the technical data is not binding and may change without notice. | ||
