Model:YK85
Specification of blow molding machine YK85
1.Siemens 7.7large size touch screen, 200 Siemens PLC
2. Hydraulic components are from YUKEN Japan, pheumatic part is from SMC from Japan,
3. With lifting platform and lifting die head
4. Alloy steel die head with plating
5.Automatic center lubrication system
6. Inverter controls the extruder
7.Can be equipped with single die head,two die heads,four die heads,two tiers head,two tiers with transparent line die head as well as servo-type thickwall controlled die head,can meet various requirements for producuts
CLAMPING UNIT | ||
Clamping force | KN | 110 |
Platen opening stroke | mm | 200-600 |
Platen size | mm | 620*520 |
Max mould size (W*H) | mm | 620*500 |
Mould thickness | mm | 210-300 |
| ||
POWER | ||
Max drive | KW | 18.5 |
Total power | KW | 49 |
Fan power for screw | KW | 0.14*3 |
Air pressure | Mpa | 0.7 |
Air consumption | M3/min | 0.9 |
Average energy consumption | KW | 30 |
| ||
EXTRDER UNIT | ||
Screw diameter | mm | 85 |
Screw L/D ratio | L/D | 25 |
Plasticizing capacity | Kg/hour | 100 |
Number of heating zone | Zone | 3 |
Extruder heating power | KW | 6 |
Extruder driving power | KW | 18.5 |
| ||
DIE HEAD | ||
Number of heating zone | Zone | 3 |
Power of die heating | KW | 2.5-4 |
Max die pin diameter | mm | 170 |
Center distance of double die | mm | 120 |
Center distance of tetra-die | mm | 70 |
GUARANTEE
The guarantee time is one year after the machines normally works in the Buyer’s factory, if only the problem is cause due to quality control or any reason by the Seller. We will supply replaced parts free of charge and our engineers will guide you how to solve the problems.
Any problem caused due to irregular operation or incorrect maintenance by the Buyer won’t be listed in guarantee coverage.
