Feature:
- Generates pure Sine Wave
- Automatic power adjustment
- Constant Power Output
- Low distortion output on all ranges
- Allow different Power factor from loads
- Compact and light weight design
- Maximum Power Point Tracking (MPPT) - optimize power output
- Plug and Play Design, simply plug into an outlet (GFI), no hard-wiring
- Stackable (connect in parallel for higher output)
- Aluminum enclosure will act as heat sink to help dissipate heat
- Simple and safe installation
- Island protection: Inverter will shut down during black outs.
- Grid-Tied - sell green power directly back to the grid at a premium rate
(depends on your location)
Specification:
Grid-inverter Type
YTP-800
Recommended Maximum PV Power
Ppv=1040Wp
DC Maximum Input Power
PDC. Max=880W
DC Maximum Voltage
VpvDC28VDC
PV MPPT DC Voltage Range
Vpv 10.5V~28DC
Peak Inverter Efficiency
η Max>94%
Power Factor
0.93-0.99
PV Maximum Input Current
Ipv. Max50A
Reverse Polarity Protectio
Fuse
AC Rating Output Power
750W AC
AC Maximum Output Power
800W AC
AC Normal Voltage Range
80V-130; 160~260VAC
AC Frequency
45-65Hz
Inverter Output Current Total Harmonic Distortion
THDIAC <5%
Phaseshift
<1%
Island Effect Protection
Inverter shuts down during black out
Output waveform
Pure Sine Wave
Inverter Output Shorting Protection
Current Limiting
Standby Power Consumption
<8W
Nighttime Power Consumption
<1W
Ambient Temperature Range
-20 ~65
Cooling
Convection cooled with fan
Ambient Humidity
0~100%(Indoor Type Design)
Eelectromagnetic Compatibility
EN50081. Part1 EN50082. Part1
Power Network Disturbance
EN61000-3-2
Power Network Detection
DIN VDE 126
Display
1 Red and 1 Green LED
Packing dimension(L*W*H)
430x255x155mm
Gross weight (kg)
3.5KG
Input and output
1DC input
* Input voltage range: 10.5V to 28V.
* Solar Panel: Recommend the use of power greater than 30W, the standard voltage 17.5V PV panels.
* Recommended, and even solar panels, thread will result in high input voltage inverter which exceeds the working voltage range.
* Wind turbine: Rated voltage 24VDC, maximum voltage 28VDC.
2AC output:
* Output 220V AC power inverter can be used in voltage: 170V - 260V, 50 Hz
* Output 110V AC power inverter can be used in voltage range: 90V - 160V, 60 Hz
LED Indicator:
1Red LED:
* Low-voltage protection (input DC voltage is less than 10.5VDC).
* Overvoltage protection (Input DC voltage is greater than 28.5VDC).
* Over-temperature protection (when the chassis temperature is above 75,
The temperature dropped about 2-10 minutes to restart automatically after cooling).
* Fault Protection (when 110VAC or 220VAC power outage or shutdown).
* Islanding protection: Electricity disconnected, the inverter automatically shut down output.
2Green LED:
* Green LED flashing: Are adjusting power output, MPPT is working condition.
* Long bright green LED: Indicates the maximum inverter output power is in the locked state of work.