400W Series AC-DC Power Supply

Feature:
High efficiency, low temperature
Universal AC output/Full range
Cooling by fan
Protection: Over-temp.; Short circuit
Over-voltage; Over load

Specification:
Model No.: LBI400-12 LBI400-15 LBI400-24 LBI400-48
Output Output voltage: +12V +15V +24V +48V
Rated current: 34A 27A 17A 8.5A
Current range: 0-25A 0-27A 0-17A 0-8.5A
Rated power: 408W 405W 408W 408W
Ripple & Noise: 100MVP-p 100MVP-p 120MVP-p 240MVP-p
Voltage adjust range: ± 10% ± 10% ± 10% ± 10%
Voltage tolerance: ± 1% ± 1% ± 1% ± 1%
Line regulation: ± 0.5% ± 0.5% ± 0.5% ± 0.5%
Load regulation: ± 0.5% ± 0.5% ± 0.5% ± 0.5%
Set up time, Rise up time, Hold-up time 50ms, 50ms, 20ms
Input: Voltage range: 90~132V/180~264V AC; 200~360V DC
AC current: 6.5A/115V; 3.2A/230V
Frequency: 47~63Hz
Efficiency: 83% 84% 84% 86%
Inrush current: 30A@230V
Leakage current: <0.5mA@240V
Protection: Over load: 105~150% rated output power, shut down, recovery after fault condition is removed
Short circuit: Shut down, recovery after fault condition is removed
Over temp. >90C, shut down, recovery after fault condition is removed
Environment: Working Temp., Humidity: -10~50C, 10~90% RH, non-condensing
Storage Temp., Humidity: -20~85C, 10~95% RH
Temp. Coefficient: ± 0.03%/C(0~50C)
Vibration 10~500Hz, 2G 10min. /1cycle, PERIOD FOR 60min. EACH AXES
Safety & EMC Safety Standard GB4943
Withstand voltage: I/P-O/P, I/P-FG: 1.5KV; O/P-FG: 0.5KV DC 1min.
Isolation resistance: I/P-O/P, I/P-FG, O/P-FG: 500VDC / 100M Ohms
EMC Standard: GB9254, EN55022 CLASS B
Others Size: 215*115*50mm CASE: K810
Weight: 1.2Kg

Remark:
1. All parameters are specified at 230Vac input, rated load, 25C 70% RH ambient;
2. Tolerance: Includes set up tolerance, line regulation, load regulation,
3. Ripple & Noise are measured at 20MHz of bandwidth by using a 30cm twisted-pair wire terminated with a 0.1uf & 47uf parallel capacitor;
4. Line regulation is measured from low line to high line at rated load;
5. Load regulation is measured from 0%~100% at rated load.