L SVR Series single-phase voltage relay with AC 50/60Hz, rate voltage 250V which is mainly use in the indu stry single-phase 110V240V250V etc. To monitor the malfunction. This relay can be used as either an undervoltage or overvoltage fault detector and can protect the input -power -supply when over voltage or under voltage.

Porduct meet the GB14085.5-2001 eqv. IEC60947-1: 1999 standred.
Warming: This product can't install in the output side of variable frequency current.

Circumstance: -25centi-degree~+65centi-degree; 90% RH
Installation: This product base adopt guide type within two M4 screw structure can be install autocephaly or by HT35 guide.
Direction Light: Have three light to display normal, overvoltage, undervoltage.

Size: 68mm X 30mm X 76mm.
Default: Overvoltage +15%, undervoltage-15%.
With T: Client requirement
With W: Can adjust overvoltage fixed value, adjust range + 15% or -15%.
Technique Dates

Main circuit:
1)Rate voltage: 110VAC, 220VAC, 240VAC, 250VAC.
2)Connect wire: The Section of insulate copper wire is 1.0~2.5mm, If the single copper wire can insert the connection directly., If adopt flexible wire we need to add a pin type connection to make sure the connect reliable

7.2Assistant circuit:
2)Using type: AC15, DC13
Contacts voltage: 250VAC or 30VAC.
Contacts current: 250VAC 2A, 30VDC 1.5A.
Fever current: 5A
Appearance size: 68H*30W*76Dmm
Power dissipation: <=5VA
Appearance and installation size

If you need another type you can visit our website or contact us.