The product is used for connection cable in the electronic computer and automatic equipment that demands high anti-interference and its rated voltage should be 500 or below. The cable earth wire core insulation adopts Model K Class B low-density polyethylene with antioxidant and anti-aging performance. The polyethylene is provided with high insulated resistance.

Fine withstand voltage. And the dielectric coefficient and dielectric loss are little affected by the temperature and frequency. It can meet the demand of transmission performance and also can guarantee the service life of the cable.
The cable adopts shield structure in order to reducing mutual interference and external interference among the lops. According to different operating places. The demand of the cable shield separately adopts: The methods of paired composite shield, total shield of paired composed cable, total shield after paired composite shield etc.

2. 1 Rated voltage (U0/U)300/500V.
2. 2 Nominal cross section: 0. 8mm2, 1. 0mm2, 1. 5mm2.
2. 3 Insulated nominal thickness: 0. 6mm.
2. 4 Sheath nominal thickness: D??15mm, thickness is 1. 5mm; D??15mm, thickness is 2. 0mm.

2. 5 Recommendation logarithm: 1, 2, 3, 4, 5, 7, (8), (9), 10, 12, 14, 16, 19, 24; The structure between the parentheses is not the recommendation ructure.
2. 6 When at 20, the conductor resistance should conform to the Standard GB/T3956.

2. 7 When the ambient temperature is 20, the insulated resistance should not be less than M??. Km after charging stably for 1min with DC voltage of 500V.
2. 8 The circuit should not be interrupted between the paired and between the paired shield and the total shield.
2. 9 It should withstand the voltage test of 50Hz, AC2000V for 5min between the cable wire core and wire core, and between the cable wire core and the shield.