CCPAM100M/S

General Description
The CCPAM100 works as Ethernet to/from VDSL subscriber-site conversion bridge.
It uses QAM-based 4-Band VDSL technology. Which supports 5M/10M/15Mbps per Port symmetrical bandwidth over phone wiring with long driver capable up to 1.9/1.3/0.8Km (6333/4333/2666 feet).
The CCPAM100 also works with DHS3224V VDSL IP DSLAM, together to form a cost-effective solution for services such as remote lecturing, telemedicine, Video conferencing, Video-on-Demand (VoD), IP-TV, Internet access, and various
High-speed data applications.
The front-panel provides LEDs indication of system and interface status. The builtin POTS/ISDN splitter allows a standard POTS phone or ISDN device to be connected.
Full or half-duplex mode of LAN operations is automatically sensed and configured. VDSL link rates are configured by local IP DSLAMs over a fix-speed and an auto-speed function.
Therefore, DHS3224V supports fix-speed, auto-speed, plug & play operations on the subscriber-site, and are part of an ideal solution for delivering cost-effective, high-performance broadband/multimedia services to Multi-Dwelling Units (MDU) and Multi-Tenant Units (MTU) environments such as hotels, campus, hospitals and point to point Application.

Key Features & Benefits
Compliant with IEEE802.3 10base-T and IEEE802.3u 100base-TX standard
Compliant with ETSI, ITU, ANSI standards
Support auto speed and 15/10/5M fix mode selectable through DIP switch
Max distance 5M/5M distance up to 1.9km(6333ft), 10M/10M distance up to 1.3km(4333ft)
Max speed 15M symmetrical and distances up to 800m(2666ft)
Supports 1 * RJ-11 connector for Ethernet over VDSL
Supports 1 * RJ-11 connector for telephone/PBX connection
Supports 1 * RJ-45 port for 10/100Mbps Ethernet with Auto MDI/MDIX
Supports 4* DIP Switch for speed selectable(CCPAM100M only)
Supports long packet size up to 1536 bytes
Supports POTS/ISDN voice pass
Supports 4wires phone set pass through
Voice and Data work on the same telephone line
Spectral compatibility with xDSL, ISDN (2B1Q/4B3T)
Supports flow control IEEE802.3x for Full Duplex / Back Pressure for Half Duplex
Supports Surge protection
Provides Power LED and LED indication link/Active Status for Ethernet
Port and link/Speed for VDSL port
Plug & Play, mini size and metal case for outdoor application
EMI certified by CE, FCC Class B, and VCCI Class B
Safety compliant EN60950-1

Product Specifications
Standard: IEEE802.3 standard
IEEE802.3u standard
Compliant with ETSI, ITU, ANSI standards
Interface: 1 * RJ-45 10/100Mbps Ethernet port
1 * RJ-11 connector for EoVDSL
1 * RJ-11 connector for telephone connection
Cable Connections: RJ-45 (Ethernet): Category 3, 4, 5 UTP/STP
RJ-11 (EoVDSL): Twisted-Pair phone wire
LED indication: Power
link/Active Status for Ethernet port
link/Speed for VDSL port
VDSL Frequency Spectrum: CCPAM100 Transmitter: 4MHz ~ 7.9MHz
Receiver: 900 KHz ~ 3.9MHz
POTS/ISDN pass filter Spectrum: 0 ~ 630KHz
Typical Power Consumption: 2.75W
Operating Temperature: -20° C ~ 70° C (-4° F ~ 158° F)
Storage Temperature: -20° C ~ 70° C (-4° F ~ 158° F)
Humidity: 10 to 90% (non-condensing)
Dimensions: 30 x 119 x 162 mm