Brand:HYGM
Model:ZD
Gear reducer are widely used in metallurgy, mining, lifting, transportation, cement, construction, chemicals, textiles , printing and dyeing, pharmaceutical and other fields.
The following shows scope of application of gear reducer:
1.Speed of High-speed Shaft is less than 1500r/min.
2.Speed of Circle of rotation gear is less than 12m/second.
3.The working environment temperature is -40~45 . If it less than 0 , lubricating oil should be preheated heating temperature more than 0 before working.
4.This reducer can be used for operation of opposite and negative direction.
5.Gear using high-frequency surface hardening quenching treatment, tooth surface hardness of HRC45-50, high accuracy and good osculation.
6.High transmission rate: single-stage more than 96.5%, dual-stage more than 93 %, three more than 90 %.
7.Smooth running, low noise.
8.Small Cubage, light weight, long working-life and high load-bearing capacity.
9.Easy to dismantle, and easy to install.
standard model | Centra distance(mm) | Speed admitted of high speed shaft(r/min) | Retarded ratio(i) | Dimension | Total Weight(kg) | |
ZD20 | 200 | ~1500 | 3.15 3.55 4 | 575×525×493 | 155 | |
ZD25 | 250 | ~1500 | 3.15 3.55 4 | 710×595×593 | 260 | |
ZD30 | 300 | ~1500 | 3.15 3.55 4 | 835×655×683 | 375 | |
ZD35 | 350 | ~1500 | 3.15 3.55 4 | 955×735×778 | 530 | |
ZD40 | 400 | ~1500 | 3.15 3.55 4 | 1085×815×878 | 735 | |
ZD50 | 500 | ~1500 | 3.55 4 | 1320×975×1106 | 1345 | |
ZD60 | 600 | ~1500 | 3.55 4 | 1550×1085×1301 | 1915 | |
ZD70 | 700 | ~1500 | 4 4.5 | 1820×1210×1496 | 2700 | |
ZD80 | 800 | ~1500 | 4 4.5 | 2080×1327×1680 | 5000 | |
ZDH30 | 300 | ~1500 | 3.08 3.55 4 | 845×715×705 | 535 |
