• Model(Square) Series

- PAG42 : 42mm / 45mm (Input Motor Spec : 50W / 100W)

- PAG60 : 60mm (Input Motor Spec : 200W / 400W)

- PAG90 : 90mm (Input Motor Spec : 750W)

- PAG120 : 120mm (Input Motor Spec : 1000 ~ 1500W)

- PAG150 : 150mm (Input Motor Spec : 2000W)

- PAG180 : 180mm (Input Motor Spec : 2000W)

• Efficiency and Ratio
- Reduction Ratio(1 Stage) i = 3 / 4 / 5 / 9 90% more than.
- Reduction Ratio(2 Stage) i = 15 / 20 / 25 / 45 / 81 88% more than.

- Reduction Ratio(3 Stage) i = 100 / 125 / 180 / 225 / 324 / 405 / 729  80% more than.

• Noise : 65dB less than
- When rated cycle speed lo-load, if it measures at 50Cm distance of front of product, above value is satisfied.

• Life-time
- Impact load life time : instant permit maximum torque = 100,000 Cycle(CW, CCW) more than.
- Rated load life time : L10Hr = 20000(Hr) more than.

• Moving / Increase in speed moving starting torque starting torque
- Moving starting torque : Rated torque * 0.6% less than(Input cycle starting torque of no-load)
- Increase in speed moving starting torque starting torque * 0.2% less than(Input cycle starting torque of no-load)

• Gear teeth intensity
- intensity of safety rate of instant maximum torque : teeth side intensity = 1.0 more than / teeth cycle winding intensity = 2.3 more than

• Lubricating method : Grease