Phenolic Moulding Compound
2016-10-24 17:01 Views:296
Price:Negotiable
Send Inquiry
| Material |
Phenolic Moulding Compound |
| | |
| Prominent characteristics | High impact strength - dimensional stability |
| | |
| General characteristics | » High mechanical strength |
| | » Heat stability |
| | » Good media resistance (eg Oil, Water) |
| | » Low shrinkage |
| | » Good Electrical resistance |
| | |
| Reference Data |
| Amity Grade | A T S / 7 5 1 | | Mode of moulding | Compression | | Colour | Brown | | Filler | Inorganic & glass fibre | | Flow | Soft/ Medium | | Properties | | Characteristics | Unit | Range | | Apparent density | g/cc | 0.68 - 0.78 | | Density of moulding | g/cc | 1.63 - 1.75 | | Shrinkage of moulding | % | 0.20 - 0.30 | | Izod impact strength | J/m of notch | 45 - 65 | | Tensile strength ( 5mm / min. ) | M Pa | 60 - 70 | | Cross breaking strength | M Pa | 100 - 120 | | Dielectric strength at 900C | M V/m | 8.0 - 10.0 | | Surface resistivity | log10ohm | 11.0 - 11.5 | | Volume resistivity | log10ohm-cm | 11.5 - 12.0 |
|
Contact Infomation
Send Inquiry
