Design

The gearhead GB C is a spur reduction gearhead with 37mm OD & OFF centre shaft meant especially for DC motor with diameters up to 36 mm.

It has a possibility of 2 to 8 stage reduction with initial stages are poly-acetal gears & final stages will be steel sintered.

All bearings are permanently lubricated & therefore require no maintenance. Motor is attached to gear box by means of screws.

The nominal torque rating for this gearhead is 0.5 Nm with peak torque range up to 0.8 Nm.

This gearhead has been categorised in 3 different housing sizes (GC-1, GC-2, GC-3) as per gear reduction for 4 , 6 & 8 stages.

Transmission ratios

GC-1 - 5.54*, 9.5, 13.85*, 23.75, 34.64*, 59.38

GC-2 - 86.59*, 148.38, 216.47*, 371.1

GC-3 - 541*, 927.7, 1352.95*, 2319

*